Roof restoration is an important investment to be made in terms of money in addition to time. The negligence of the same could result in very expensive consequences. The safety of your family and home comes at stake, which should not be taken lightly.
So, Here Are The Steps That Should Be Followed During Roof Restoration:
#1. Detailed Assessment of The Roof
The first and foremost step to roof restoration is to carefully asses it for damage and mutilation points. Broken or cracked tiles, old tiles that are at the risk of breaking, or metal sheets that have punctured due to fallen objects, hail damage, are the things that should be checked. Photos allow for the repair of the damaged points systematically. Since roof restoration is done once in a few years, take your time for thorough inspection. Safety wear should be adorned properly to prevent any accidents.
#2. High Pressure Roof Cleaning
After proper inspection, a high-pressure roof cleaning is done to wash off the grime, debris and dirt accumulated over the years. It helps in recognizing weak tiles, makes the damaged points clearer and gives an opportunity to check if there is any roof leakage. That way they can be photographed or marked for the repairing phase. During this process, the gutters should also be cleared. You should be careful about changing the tiles, shingles and cement and stone structures that keep on jutting out. In any case, the roof restoration specialists can help you out in this matter.
#3. Repair, Replacement, Relocation, Rebedding, And Repointing of Roof
Workmanship comes into play in this step as this is the critical step of roof restoration. Any broken or cracked tile, metals sheet is replaced with new ones and mended carefully. The ones which have excessive signs of damage or overuse can be resituated at the bottom edge where the gutter is. This area does not face any problems because of that. Replaced tiles that are luckily totally undamaged can be utilized to fill the gaps that have been left by the relocated tiles. Further protection of the house can be done from access of water and intrusion by reinforcing or replacing the aged, damaged mortar by the application of pointing compound which is flexible using a trowel.
#4. Application of Chemical for Preservation
To protect the repairing work that has been done, a chemical coating should be applied for preserving the hard work. It increases roof durability, which lets you prolong the maintenance for the next time. Different kinds of coatings are available that vary in functionality and effectiveness. They may include works like rust proofing, water proofing and thermal insulation.
#5. Prime, Color and Seal
Priming, coloring and sealing is vital to further protect the tiles from moss, algae, weather damage and UV rays. It ensures a strong life of the tiles and the specialists of roofing in Australia also prefer it for the best kind of roof restoration along with its protection.
#6. The Final Assessment
Once the final touches have been given, a final assessment of the roof restoration should be done to ensure that no areas have been left out. It is essential to have a last walk through so that you can make sure the work is done appropriately and completely.
The process of roof restoration might take a while, but it will be worth it in the long run. It is a part of your house that is inevitably important. Restoring a roof requires much labor. Apart from this, there are cases where your labors bring high quality cement, concrete and roof rendering and restoring materials to give the roof its desired condition.
